Licensed & Insured, in Oxnard and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Oxnard
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (805) 330-3288 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Oxnard and surrounding areas · On-site visits included · Free estimate within 24h
Oxnard Metal Roofing is a team of local certified professionals based in Oxnard. We respond quickly in Oxnard and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (805) 330-3288⭐⭐⭐⭐⭐ 4.9/5 · 254 verified Google reviews
“We needed a metal roof for our 60x120 ft equipment barn out in the fields and these guys knocked it out in under two weeks. The crew of five was on time every morning and left the site cleaner than they found it. I'd been quoted way more by two other outfits, so this was a relief.”
Commercial & Agricultural Metal Roofing
“Had them put a small standing seam awning over our front entry and it turned out way nicer than I expected. They matched the house trim perfectly and were done in a day.”
Metal Roof Installation
“Our old barn roof was rusted through in spots and I was worried it was a goner. These folks replaced the corrugated panels on the whole thing and even re-flashed around the vents. Livestock are dry and I'm a happy customer.”
Commercial & Agricultural Metal Roofing
“Tore off our old shingles and put down a stone-coated steel roof on our 2,400 sq ft place. It looks great and the crew was super respectful of our landscaping. Only gripe is they showed up a day late to start, but honestly the finished job made up for it.”
Metal Roof Replacement
“We had water coming in around where a support post meets the roof and it was driving me nuts. They found the bad flashing, sealed it up properly and re-fastened the panels around it. No leaks through the last big rain, so I'm thrilled.”
Metal Roof Leak Repair
“Brand new standing seam roof on our house and honestly it looks like a different home. The crew of four was in and out in four days and cleaned up every last screw and scrap. Couldn't be happier.”
Standing Seam Metal Roofing
“Went with the retrofit over our existing shingles to save some money and I'm glad we did. They checked everything first and explained the whole process, and the ribbed panels went on clean. A couple of the crew spoke limited English so communication was a little bumpy, but the work itself is solid.”
Metal Roof Over Shingles (Retrofit)
“I called them out thinking I needed a whole new roof but they said the panels were fine and just did a re-fastening and screw replacement plus a fresh coat. Saved me thousands. Honest folks, which is rare these days.”
Metal Roof RepairReal photos of our work in Oxnard · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel installation | Starting at $8/sq ft | Corrugated or ribbed panels, synthetic underlayment and washered fasteners included; simple roof geometry stays near this rate. |
| Standing seam installation | Starting at $14/sq ft | Concealed-clip panels, Kynar finish and coastal-rated fasteners; low pitch and complex flashing move the price up. |
| Metal shingle or stone-coated steel | Starting at $12/sq ft | Tile or shake profile systems with underlayment; number of valleys, hips and penetrations drives the final figure. |
| Complex or large-scale job | On estimate | Two-story beach homes, historic district properties and multi-building farm sites need an on-site look before pricing. |
| Travel | Included | in Oxnard and surrounding Ventura County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (805) 330-3288, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam installation (simple gable) | Starting at $10/sq ft | Includes underlayment, concealed clips, standard trim, and seaming on a straightforward single-story roof |
| Standing seam installation (complex roof) | Starting at $14/sq ft | Hips, valleys, skylights, and two-story access add labor, custom flashing, and staging time |
| Tear-off and deck repair | On estimate | We price removal of the old roof and any sheathing replacement after we inspect the deck |
| Historic or HOA design review | On estimate | Profile and color approval can affect material lead time and scheduling, so we quote after review |
| Travel | Included | In Oxnard and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (805) 330-3288, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Full tear-off and replacement, exposed fastener panels | Starting at $9/sq ft | Includes tear-off, deck inspection, new underlayment, panels and cleanup; pitch and access move the price. |
| Standing seam replacement | Starting at $14/sq ft | Concealed fasteners and raised seams; roof complexity and panel gauge drive the final number. |
| Stone-coated steel or metal shingle replacement | Starting at $12/sq ft | Tile-look profiles for HOA and historic review; number of valleys and penetrations affects cost. |
| Copper and specialty metal replacement | On estimate | Material cost and detailing vary widely; we need an on-site look before quoting. |
| Travel | Included | In Oxnard and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (805) 330-3288, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic retrofit overlay, single-story ranch | Starting at $7/sq ft | Includes underlayment, standard trim, coastal-grade fasteners, and labor on a sound deck. |
| Battened retrofit for uneven shingles | From $8.50/sq ft | Adds battens and a drainage plane over wavy or low-slope shingle beds. |
| Stone-coated steel or standing seam retrofit | From $11/sq ft | Premium panel profiles and finishes cost more in material and trim detail. |
| Partial tear-off and deck repair | On estimate | We need to see the extent of rot or storm damage before quoting deck repairs. |
| Travel | Included | in Oxnard and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (805) 330-3288, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (fasteners, sealant, edge re-secure) | Starting at $450 | Covers a handful of fasteners, seam resealing, or a lifted edge on a single-story roof |
| Panel replacement (one to three panels) | Starting at $850 | Includes matching panel, new fasteners, and sealant; height and pitch move the price |
| Corrosion treatment and seam restoration | Starting at $1,200 | Cleaning, treating, and sealing rusted cut edges and laps on older roofs near the harbor |
| Flashing, chimney, or skylight repair | Starting at $650 | Re-flashing and sealing penetrations; access and flashing complexity drive the number |
| Complex or large-scale repair | On estimate | Multiple panel runs, widespread corrosion, or two-story access needs an on-site look first |
| Estimate | Free | Response within 24 hours at (805) 330-3288, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single-source leak repair | Starting at $450 | Includes inspection, source tracing, and fix for one pipe boot or small fastener cluster |
| Multi-point fastener and seam repair | Starting at $750 | Includes replacement of corroded screws and washers plus seam re-seaming on one roof section |
| Flashing rebuild at chimney or skylight | Starting at $950 | Includes removal of failed flashing, new metal flashing, and proper sealant at the transition |
| Targeted panel replacement | On estimate | Requires on-site inspection to confirm panel profile, color match, and extent of corrosion |
| Travel | Included | In Oxnard and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (805) 330-3288, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Small shed or carport re-fasten | Starting at $750 | Covers up to roughly 100 fasteners on a single low-slope panel roof with standard access. |
| Residential roof partial re-fasten | Starting at $1,150 | Replaces failed fasteners on one or two slopes, includes washers and rust treatment. |
| Full residential re-fasten | Starting at $1,800 | Whole-roof washer replacement and re-torque, priced by fastener count and roof height. |
| Ridge and eave uplift retrofit | On estimate | Adds fasteners at wind-loaded edges; needs an on-site count before we quote a number. |
| Travel | Included | in Oxnard and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (805) 330-3288, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof, standard shed or carport | Starting at $5.50/sq ft | Includes panels, underlayment, coastal-grade screws and basic trim; pitch and tear-off move the price. |
| R-panel (ribbed) roof on workshop or outbuilding | Starting at $6.50/sq ft | Includes wider ribbed panels, closures and trim; purlin condition and access drive the final number. |
| Residential re-roof with tear-off | Starting at $8.50/sq ft | Includes strip-off, deck inspection, panels and flashing; roof height and disposal add cost. |
| Complex or large-scale commercial job | On estimate | Heavy-gauge panels, multiple elevations and crane access need an on-site look before pricing. |
| Travel | Included | in Oxnard and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (805) 330-3288, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof, standard profile | Starting at $9/sq ft | Includes tear-off, underlayment, flashing, and standard fasteners on a walkable single-story roof. |
| Coastal-spec metal shingle | Starting at $11/sq ft | Adds heavier factory coating and stainless or coated fasteners for salt-air exposure near the harbor. |
| Steep or two-story installation | Starting at $12/sq ft | Higher labor and staging for steep pitch, two-story access, and landscaping protection. |
| Historic or HOA design review | On estimate | Profile and color approval plus paperwork add time, so we quote after reviewing the requirements. |
| Deck repair and flashing rebuild | On estimate | Soft decking, fascia, and complex valley or chimney flashing need an on-site look before pricing. |
| Estimate | Free | On-site inspection and written scope, response within 24 hours at (805) 330-3288. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel, full tear-off and install | Starting at $9/sq ft | Includes tear-off, underlayment, panels, trim, and disposal on a standard gable roof |
| Stone-coated steel over existing shingles | Starting at $7.50/sq ft | Recover pricing depends on layer count, deck condition, and code limits |
| Tile-profile or shake-profile panel upgrade | Starting at $10.50/sq ft | Premium profiles and colors add material cost and may require design review |
| Repair and re-fastening | On estimate | Fastener corrosion, lifted panels, and flashing leaks need an on-site look |
| Travel | Included | In Oxnard and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (805) 330-3288, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent roof (porch, bay window) | Starting at $20/sq ft | Includes custom fabrication and concealed fasteners; complexity and access move the price. |
| Zinc or aluminum accent panels | Starting at $22/sq ft | Includes underlayment and trim; panel profile and roof pitch affect the final rate. |
| Full copper architectural roof | Starting at $35/sq ft | Includes tear-off, deck repair and fabrication; roof size and detail count drive cost. |
| Custom flashing and trim only | Starting at $600 | Shop-fabricated pieces for chimneys, valleys and dormers; linear footage sets the price. |
| Complex or historic district job | On estimate | Historic review, curves and HOA requirements need an on-site look before pricing. |
| Estimate | Free | Response within 24h at (805) 330-3288, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard reflective coating | Starting at $2.50/sq ft | Includes cleaning, rust spot-treatment, and one finish coat on a sound, accessible roof. |
| Full prep and primer system | Starting at $3.50/sq ft | Adds rust converter, bare-metal primer, and two finish coats for roofs with moderate corrosion. |
| Stone-coated steel recoat | Starting at $4.50/sq ft | Specialty coating matched to granular acrylic base, plus seam and fastener sealing. |
| Complex or large-scale job | On estimate | Two-story access, steep pitches, heavy rust, or multiple roof sections need an on-site look first. |
| Travel | Included | in Oxnard and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (805) 330-3288, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single penetration flashing repair | Starting at $600 | Covers one accessible pipe boot or small skylight reseal with new flashing and sealant |
| Chimney flashing rebuild | Starting at $950 | Removes old tar and sealant, cuts new step and counterflashing to fit the chimney |
| Skylight curb reflash | Starting at $850 | Rebuilds curb flashing and replaces hardened seals on one skylight, roof access dependent |
| Multiple penetrations or complex transitions | On estimate | Needs an on site look to count penetrations, check pitch and confirm material |
| Travel | Included | in Oxnard and surrounding Ventura County areas, no separate call out or mileage fee |
| Estimate | Free | Response within 24 hours at (805) 330-3288, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Fastener replacement and re-fastening | Starting at $1,200 | Includes pulling corroded screws and installing coated replacements with sealing washers on a single roof section. |
| Edge metal and ridge securement | Starting at $1,450 | Includes re-anchoring edge metal and ridge caps against wind uplift, with cost rising on two-story access. |
| Flashing rebuild at penetrations | Starting at $1,600 | Includes replacing decayed flashing at chimneys, skylights and walls, with cost rising with the number of penetrations. |
| Complex or large-scale coastal protection | On estimate | Multiple roof sections, steep pitch or heavy salt corrosion need an on-site look before we quote a number. |
| Travel | Included | In Oxnard and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (805) 330-3288, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof, flashing, and fastener inspection with photo documentation and a written repair versus replacement recommendation |
| Minor repair (panel, ridge cap, flashing lap) | Starting at $350 | Includes matched panel or cap, new sealant, and photo record; access and roof height move the price |
| Fastener replacement and re-fastening | Starting at $600 | Corroded screws and washers replaced on exposed-fastener roofs; panel count and salt corrosion level move the price |
| Section replacement (multiple panels or shingles) | Starting at $1,200 | Damaged run replaced with matching profile; panel type and extent of wind damage move the price |
| Complex or large-scale storm job | On estimate | Widespread damage, insurance scope, or combined corrosion and wind failure needs an on-site look before a number |
| Estimate and response | Free | Response within 24 hours at (805) 330-3288, no obligation to book the repair |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standard metal roof inspection | Free estimate | Walk-over inspection with photo documentation and written report included |
| Pre-purchase or insurance inspection | Starting at $250 | Detailed condition report with remaining service life estimate for buyers or insurers |
| Large or complex roof inspection | On estimate | Multi-story, steep pitch or many penetrations need an on-site look first |
| Travel | Included | in Oxnard and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (805) 330-3288, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, standard run | Starting at $9/linear ft | Includes on-site forming, corrosion-resistant hangers, downspouts, and water test on an accessible single-story run. |
| Heavy-gauge seamless for standing seam | Starting at $14/linear ft | Tighter hanger spacing and deeper profile for concentrated flow off smooth standing seam panels. |
| Gutter replacement and re-hang | Starting at $12/linear ft | Removes failed or corroded gutters and re-hangs to the current panel profile, fascia condition affects the price. |
| Commercial and agricultural gutter | On estimate | Wide roofs, long spans, and reinforced hangers need an on-site look before we quote capacity and layout. |
| Travel | Included | In Oxnard and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (805) 330-3288, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Inspection and leak diagnosis | Free estimate | On-site walk, leak tracing and written scope, with access and roof height as the main factors. |
| Targeted repair and re-fastening | Starting at $650 | Screw replacement, flashing and penetration repair, priced by roof size and fastener count. |
| Exposed-fastener panel installation | Starting at $9 per sq ft | R-panel or corrugated with coastal-grade fasteners, insulation and trim included. |
| Standing seam installation | Starting at $14 per sq ft | Concealed-fastener system for harbor-side and commercial buildings, priced by panel gauge and height. |
| Large commercial or agricultural building | On estimate | Purlins, deck repair and staging need an on-site look before any number is given. |
| Travel | Included | in Oxnard and surrounding areas, no separate call-out or mileage fee. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Oxnard need a crew that understands this coastal plain between the Pacific and the Santa Monica and Topatopa mountains. Oxnard Metal Roofing is that local resource, a network of licensed, bonded, and insured contractors who install, replace, re-roof, and repair metal systems on homes from the Henry T. Oxnard Historic District to the beach cottages of Oxnard Shores and the canal-front homes around Channel Islands Harbor. We work on steep pitches, under heavy tree cover, and in high-exposure settings where salt air and UV do their slow work.
Much of our repair work involves the large stock of aging screw-down roofs on 1950s to 1980s stucco ranches and farm buildings, where fasteners and washers have reached the end of their service life. We serve Oxnard, Port Hueneme, Ventura, Camarillo, and Santa Paula, and we are glad to walk a roof and give you a straight answer. Reach out through our free estimate page to schedule a look.
Most metal roof leaks we see in Oxnard start at a fastener. On 15 to 30 year old exposed-fastener roofs, the EPDM sealing washer under each screw dries, shrinks, and cracks, and water finds its way past the fastener and into the attic. The second most common cause is seam separation from thermal movement: panels expand and contract through hot afternoons and cool marine nights, and seams that were once tight can open. Failed pipe boots and flashing at chimneys, skylights, and valleys let water in at penetrations, while Santa Ana winds can lift panel edges and fallen eucalyptus or palm limbs can puncture a panel outright.
Ignoring a small leak is expensive. Water tracks along purlins and decking far from the entry point, so by the time you see a stain on the ceiling, sheathing may already be soft and insulation soaked. That is why we trace the actual source rather than patching the stain. Our Metal Roof Leak Repair service starts with a careful inspection and a written explanation of what we found.
We are honest about the repair versus replace call. If the panels are sound and the issue is fasteners and washers, a full screw replacement often restores a watertight roof for a fraction of replacement cost. If the metal itself is perforated or the deck is rotted through, replacement is the right answer. Call (805) 330-3288 to talk through your options, or contact us to schedule an inspection.
We install the full range of residential and light commercial metal systems. Standing Seam Metal Roofing uses concealed clips and hidden fasteners, which makes it the premium choice with no exposed screws to maintain. Exposed-fastener Corrugated & Ribbed Panel Roofing is the economical workhorse for sheds, barns, workshops, and budget-minded homes. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing that mimics Spanish tile, and Copper & Specialty Metal Roofing for porches, bay windows, and accents.
The honest comparison is simple: standing seam costs more up front and has no exposed screws to service, while screw-down costs less and needs its fasteners checked and replaced over its life. We also offer Metal Roof Over Shingles (Retrofit) when the deck is sound, and full tear-off when it is not.
Metal roof installation is typically quoted per square foot, while repairs are often flat-rate. Final pricing depends on the roof and site conditions: the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. We give typical ranges rather than fixed numbers because two homes on the same street can price differently once we are on the roof. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer.
For a clearer picture, see our pricing page, then request a free estimate or free roof inspection so we can quote your actual roof.
After a wind or storm event, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. On permits: in most jurisdictions a permit is commonly required for a full replacement, but requirements vary by city, and thresholds, fees, and inspection requirements differ. Historic district or HOA design review can also affect panel profile and color choices. Requirements vary, always verify with the Oxnard building or planning department before starting your project. Contact us with questions about your roof.
Ready to get started? Oxnard Metal Roofing serves in Oxnard and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Oxnard · Response within 24h · No commitment · ☎ (805) 330-3288
Your Free Quote Request