Serving the Oxnard area  ·  (805) 330-3288  ·  Open Mon-Sun 7am-7pm
📞 (805) 330-3288 Free Quote

Metal Roofing in Thousand Oaks, CA (91360) · Local Professionals

Oxnard Metal Roofing · Fast response in Thousand Oaks and the Oxnard area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+254Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Thousand Oaks is a city of hillside views and oak-lined streets, where homes from the 1960s ranches near Lynn Road to the newer developments off Rancho Road sit on lots that slope and shift with the terrain. The mix of sun-baked stucco and concrete tile roofs means homeowners here need roofing that can handle intense UV, dry Santa Ana winds, and the occasional winter rain without constant upkeep.

We are Oxnard Metal Roofing, based just down the 101, and we serve Thousand Oaks (91360) with metal roofing systems built for this climate. Whether you are near The Oaks mall or up in the Conejo Valley foothills, we know the local building stock and the specific challenges that come with roofing here.

Metal Roofing in Thousand Oaks (91360)

Thousand Oaks sits in a valley with rolling hills and mature oak trees, and that terrain affects every roofing job. Many homes are on sloped lots with tight side yards, so staging materials and accessing the roof requires careful planning. The soil can be expansive in some areas, which puts stress on foundations and roof structures over time. Add in the dry, windy falls and the occasional heavy rain, and you get a climate that punishes cheap roofing materials. Metal roofing is a natural fit here because it resists fire, reflects heat, and holds up to wind uplift better than asphalt shingles or tile.

Our team has worked on homes throughout Thousand Oaks and the surrounding Ventura County area. We understand the local building department requirements and the HOA design guidelines that apply in many neighborhoods. Whether you need a new standing seam roof on a hillside home or a stone-coated steel roof that mimics the look of Spanish tile, we have the experience to get it done right.

Our services in Thousand Oaks

How a Job Works in Thousand Oaks

Step 1: We start with a free on-site assessment. You call us at (805) 330-3288, and we schedule a time to inspect your roof, discuss your options, and take measurements. We will check the condition of your existing roof, look for signs of leaks or damage, and talk through the best metal roofing system for your home and budget.

Step 2: Once you approve the estimate, we handle the permitting and scheduling. In Thousand Oaks, roofing permits are required for most replacements, and we know the local requirements. If your home is in an HOA, we can help coordinate the approval process for panel profiles and colors. On the job site, our crew works efficiently to minimize disruption, especially on tight lots where access is limited.

Step 3: After the work is done, we do a thorough cleanup and walkthrough with you. We make sure the site is clean, all debris is removed, and you understand how to care for your new metal roof. We do not leave until you are satisfied.

Pricing for metal roofing in Thousand Oaks depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot. Repairs for leaks or damaged panels start at $450, and screw replacement or re-fastening starts at $750. We also offer coatings and painting from $2.50 per square foot. For an accurate quote, call us at (805) 330-3288 for a free estimate.

My house is on a slope in the Conejo Valley foothills. Can you still install a standing seam metal roof?
Yes, we regularly work on sloped and hillside properties in Thousand Oaks. Our crews are trained to handle the access challenges and ensure proper flashing and securement on steep grades. We will assess your specific site during the free estimate and recommend the best approach.
A windstorm just lifted some panels on my roof near Thousand Oaks Boulevard. How quickly can you respond?
We prioritize storm damage calls and can often provide same-day or next-day inspections. Call us at (805) 330-3288, and we will schedule a prompt assessment to secure your roof and prevent further damage.
What is the typical cost to replace a tile roof with stone-coated steel in a Thousand Oaks neighborhood like Lynn Ranch?
Stone-coated steel roofing starts at $9 per square foot, but the total cost depends on the size of your roof, the pitch, and the condition of the existing underlayment. Most homeowners in Thousand Oaks spend between $15,000 and $30,000 for a full replacement. We provide a detailed, no-obligation estimate after inspecting your roof.
Do I need a permit from the City of Thousand Oaks to install a metal roof?
Yes, a building permit is typically required for a roof replacement or new installation. The exact requirements vary, so we always verify with the city's building department before starting work. We handle the permitting process for you to ensure compliance.
My HOA has strict design rules. Can you help get approval for a metal roof in my Thousand Oaks community?
Absolutely. We have experience working with HOAs throughout Thousand Oaks. We can provide product specifications, color samples, and any documentation your HOA needs for approval. We will coordinate with your board to make the process smooth.
Are you fully insured for roofing work in Thousand Oaks?
Yes, we carry general liability insurance and workers' compensation coverage. We are happy to provide proof of insurance upon request, so you can have peace of mind knowing your property and our crew are protected.
What maintenance does a metal roof need in Thousand Oaks' dry, windy climate?
Metal roofs are low maintenance, but we recommend an annual inspection to check for loose fasteners, debris buildup, and any signs of wear. In Thousand Oaks, the dry Santa Ana winds can loosen screws over time, so a quick check before the rainy season is wise. We offer affordable maintenance plans to keep your roof in top shape.
Why choose us?

Trusted professionals in Oxnard

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Oxnard

All your work handled by qualified professionals in Oxnard

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

254+ Verified Client Reviews in Oxnard

⭐⭐⭐⭐⭐ 4.9/5 · 254 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Oxnard · Response within 24h · No commitment · ☎ (805) 330-3288

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Oxnard ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm