Serving the Oxnard area  ·  (805) 330-3288  ·  Open Mon-Sun 7am-7pm
📞 (805) 330-3288 Free Quote

Metal Roofing in Oxnard, CA (93035) · Local Professionals

Oxnard Metal Roofing · Fast response in Oxnard and the Oxnard area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+254Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Oxnard is a flat coastal-plain city where salt air and Santa Ana winds work on every roof from the Henry T. Oxnard Historic District to the beach cottages in Oxnard Shores. The housing stock runs from 1920s Craftsman bungalows and Mediterranean homes near downtown to 1950s stucco ranches in College Park and two-story subdivisions in Seabridge and River Ridge. Metal roofing here means standing seam on modern remodels, corrugated panels on farm sheds near the strawberry fields, and stone-coated steel that mimics Spanish tile on HOA homes.

Homeowners in 93035 call Oxnard Metal Roofing because we understand what coastal salt air does to fasteners and bare metal, and we know how dry Santa Ana winds can lift panel edges. Whether you are near Channel Islands Harbor or off Gonzales Road, we are your local crew for metal roof installation, repair, and replacement.

Metal Roofing in Oxnard (93035)

Oxnard's terrain is a flat coastal plain between the Pacific and the Santa Monica and Topatopa mountains, ringed by strawberry, celery, and vegetable fields. That flat ground means low-pitched roofs are common, and drainage relies on proper flashing and gutters rather than steep slopes. The constant salt air corrodes fasteners and bare metal quickly, so we specify corrosion-resistant screws and finishes. Dry autumn Santa Ana winds funnel through the river bottoms and can lift roof edges, especially on older homes in the Henry T. Oxnard Historic District and Colonia, where 1900s-1930s bungalows may have skipped proper wind-rated fastening. In beach communities like Oxnard Shores and Channel Islands Harbor, canal-front homes face the double challenge of salt spray and wind-driven rain. Our team has worked on everything from corrugated R-panel on packing buildings to copper accents on porches, and we know which profiles and colors pass HOA design review in Seabridge and River Ridge.

We have served Oxnard and the surrounding areas for years, and we understand the local building department's permit thresholds for re-roofs and the code limits on recovering over existing shingles. When you need a metal roof that stands up to salt air and Santa Ana winds, call us.

Our services in Oxnard

How a Job Works in Oxnard

Step 1: You call (805) 330-3288 or request a free estimate online. We schedule an on-site assessment at your Oxnard property, inspect the existing roof, check attic ventilation and flashing details, and discuss your options for metal roofing, from corrugated panels to standing seam. We also note any HOA or historic district requirements that may affect panel profile or color.

Step 2: Once you approve the scope and price, we pull the necessary permits through the City of Oxnard and schedule the work. For tight lots in older neighborhoods or canal-front homes in Oxnard Shores, we plan material delivery and staging carefully. If your home is in a historic district or HOA, we coordinate color and profile approvals before ordering materials. Our insured crews handle installation, repair, or replacement with minimal disruption, and we keep you informed on progress.

Step 3: After the work is complete, we walk the site with you, clean up all debris, and make sure gutters and downspouts are clear. We leave your property clean and provide a final walkthrough so you know exactly what was done and how to maintain your new metal roof.

Pricing for metal roofing in Oxnard depends on the size and complexity of your roof, access, existing roof condition, and material choice. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are retrofitting over existing shingles, metal roof over shingles starts at $7 per square foot, but code limits the number of existing layers, so we verify that first. Repairs start at $450, and screw replacement and re-fastening starts at $750. For a free estimate tailored to your Oxnard property, call (805) 330-3288.

My 1950s ranch in College Park has a low-pitched shingle roof. Can I switch to standing seam metal?
Yes, standing seam works well on low-pitch roofs, but we need to check the minimum slope required for the panel profile and ensure proper underlayment and ventilation. Many College Park homes have 3:12 or lower slopes, and we can recommend a standing seam system with a mechanical seam that handles that pitch. We will also assess the existing sheathing and framing to make sure it can support the new roof.
A Santa Ana wind event peeled back some panels on my roof in Oxnard Shores. How fast can you respond?
We treat wind damage as a priority, especially in beach communities where salt air and wind combine. Call us at (805) 330-3288, and we will schedule an inspection as soon as possible, often within 24 to 48 hours. We can secure the roof temporarily and provide a written estimate for permanent repairs, including re-fastening or panel replacement.
What does a typical metal roof replacement cost for a 1,500 square foot home in Oxnard?
For a 1,500 square foot home, a basic corrugated panel roof might start around $8,250 (at $5.50 per square foot), while standing seam could range from $15,000 and up, depending on complexity, removal of old roofing, and flashing details. These are ballpark figures. We provide a free on-site estimate so you get an accurate number for your specific roof.
Do I need a permit to replace my roof in Oxnard, and how do I check the rules?
Yes, roofing permits are commonly required for a full replacement or re-roof in Oxnard, and thresholds, fees, and inspection requirements vary. We recommend checking with the City of Oxnard website for current rules, and we can handle the permit application process for you as part of the job.
My HOA in River Ridge requires Spanish tile look. Can you install stone-coated steel that matches?
Absolutely. Stone-coated steel roofing comes in profiles and colors that mimic Spanish tile, and we can provide samples for HOA approval. We are familiar with HOA design review in River Ridge and Seabridge, and we will coordinate the approval process so your new roof meets community standards.
Are you fully insured for metal roofing work at my Oxnard property?
Yes, we are fully insured with general liability and workers' compensation coverage.
How often should I inspect my metal roof in Oxnard's coastal climate?
We recommend an annual inspection, ideally in late summer before the Santa Ana winds and winter rains. Salt air accelerates corrosion on fasteners and bare metal, so we check screws, seams, and flashing for wear. A quick maintenance check can catch loose fasteners or minor leaks before they become costly problems.
Why choose us?

Trusted professionals in Oxnard

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Oxnard

All your work handled by qualified professionals in Oxnard

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

254+ Verified Client Reviews in Oxnard

⭐⭐⭐⭐⭐ 4.9/5 · 254 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Oxnard · Response within 24h · No commitment · ☎ (805) 330-3288

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Oxnard ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm