Serving the Oxnard area  ·  (805) 330-3288  ·  Open Mon-Sun 7am-7pm
📞 (805) 330-3288 Free Quote

Metal Roofing in Simi Valley, CA (93065) · Local Professionals

Oxnard Metal Roofing · Fast response in Simi Valley and the Oxnard area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+254Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Simi Valley is a city of ranch homes and hillside subdivisions tucked between the Santa Susana Mountains and the Simi Hills, where hot sun and dry Santa Ana winds beat on roofs year after year. From the 1950s tract homes near Sycamore Drive to the newer hillside developments off Tapo Canyon Road, most houses here have low-pitched shingle or concrete tile roofs that are feeling their age.

Homeowners in 93065 call Oxnard Metal Roofing because we understand what Simi Valley weather does to a roof: UV bakes shingles, wind lifts edges, and the occasional winter rain finds every weak flashing. We are based in Oxnard and serve Simi Valley and the surrounding areas, bringing fully insured crews and honest pricing to every job.

Metal Roofing in Simi Valley (93065)

Simi Valley sits in a valley with hot summers and dry winds, and that combination is hard on roofing. Many homes here are on graded lots with tight side yards, so access can be tricky and staging materials takes planning. The soil is often clay-heavy, which means proper drainage away from the foundation matters as much as the roof itself. Hillside homes off the 118 Freeway corridor see stronger wind exposure, and older ranch properties near the Simi Valley Town Center often have multiple roof layers that need to be addressed before a new metal roof goes on.

Our team has worked on everything from small ranch repairs to full metal roof replacements in Simi Valley. We know the local building department requirements and can help you navigate permits for a re-roof or replacement. Whether you are near Rancho Simi Community Park or out toward the Santa Susana Pass, we bring the same attention to detail and respect for your property.

Our services in Simi Valley

How a Job Works in Simi Valley

Step 1: Call us at (805) 330-3288 or request a free estimate online. We schedule an on-site assessment at your Simi Valley property, inspect the existing roof, check flashing and fasteners, and talk through your options. You get a written estimate with clear pricing before any work begins.

Step 2: Once you approve, we pull the necessary permits with the City of Simi Valley and schedule the work. Our crews arrive on time, protect your landscaping, and work efficiently. If your home is in an HOA, we can coordinate color and profile approvals so there are no surprises. Tight lots and steep driveways are common here, so we plan material delivery and staging carefully.

Step 3: After installation, we do a full cleanup, haul away old materials, and walk the property with you to make sure everything meets your expectations. We do not consider a job done until you are satisfied and your yard is clean.

Pricing for metal roofing in Simi Valley depends on the size and pitch of your roof, the condition of the existing structure, access, and the material you choose. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot, though local code limits how many layers can remain. Repairs start at $450, and coating or painting starts at $2.50 per square foot. For a precise number, call (805) 330-3288 and we will schedule a free estimate at your Simi Valley home.

My Simi Valley ranch home has original 1970s shingles and I am considering a metal roof over them. Is that allowed here?
In many cases, yes, but it depends on how many layers are already on the roof and what the City of Simi Valley building department allows. We inspect your roof and verify the layer count before recommending a retrofit. If a full tear-off is required, we will explain why and give you a clear estimate for both options.
A Santa Ana wind event peeled back some panels on my roof near the 118 Freeway. Can you help quickly?
Yes. Wind damage is common in Simi Valley during dry wind events, and we prioritize emergency repairs. Call (805) 330-3288 and we will schedule an inspection, secure the roof if needed, and provide a repair estimate. We handle storm and wind damage repairs and can document the damage for your insurance claim if you file one.
What does a typical metal roof replacement cost for a 1,500 square foot home in 93065?
For a home that size, most metal roof replacements fall in the range of $13,500 to $20,000 depending on the material, roof complexity, and whether a tear-off is needed. Standing seam and stone-coated steel are at the higher end, while corrugated panels are more economical. We give you a detailed written estimate after inspecting your roof.
Do I need a permit from the City of Simi Valley for a metal roof replacement?
Yes, a roofing permit is typically required for a full replacement or re-roof in Simi Valley. Requirements and fees vary, so we confirm the specifics with the city building department before starting work. We handle the permit application and inspections as part of our service.
My HOA has design rules about roof colors. Can you help with approval?
We can provide material samples and color chips for your HOA submission and coordinate with your architectural committee if needed. Many Simi Valley HOAs have approved lists for metal roofing, and we will help you choose a profile and color that meets the rules and looks right on your home.
Are you fully insured for roofing work in Simi Valley?
Yes, we carry general liability insurance and workers' compensation coverage for all our crews. We can provide proof of insurance before work begins so you have peace of mind.
How often should I have my metal roof inspected in Simi Valley?
We recommend an inspection every two to three years, especially after a windy season or a big rain. Fasteners can loosen over time, and debris from nearby trees can trap moisture. A quick inspection now can prevent a leak later. We offer free estimates for metal roof inspections in Simi Valley.
Why choose us?

Trusted professionals in Oxnard

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Oxnard

All your work handled by qualified professionals in Oxnard

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

254+ Verified Client Reviews in Oxnard

⭐⭐⭐⭐⭐ 4.9/5 · 254 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Oxnard · Response within 24h · No commitment · ☎ (805) 330-3288

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Oxnard ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm