Serving the Oxnard area  ·  (805) 330-3288  ·  Open Mon-Sun 7am-7pm
📞 (805) 330-3288 Free Quote

Metal Roofing in Moorpark, CA (93021) · Local Professionals

Oxnard Metal Roofing · Fast response in Moorpark and the Oxnard area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+254Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Moorpark sits just up the 118 from Oxnard, where the valley floor tilts up toward the Santa Susana foothills and the wind never really stops. The housing stock tells the story: 1980s and 90s two-story stucco subdivisions with concrete tile roofs, ranch homes on larger lots near Moorpark College, and working ag buildings and equestrian properties out toward Hitch Boulevard and the Tierra Rejada corridor. If your roof has been baking in that dry, dusty wind for twenty years, it is probably telling you something.

We are Oxnard Metal Roofing, and Moorpark is one of our regular service areas. Homeowners in 93021 call us because we know the difference between a hillside subdivision with tight side yards and a farm building with a long low roof and a corrugated panel that has been flapping in the wind since the last Santa Ana event. We are fully insured, we pull permits through the City of Moorpark, and we give you a straight answer on what your roof actually needs.

Metal Roofing in Moorpark (93021)

Moorpark is not Oxnard. The marine layer that keeps the coast cool burns off by mid-morning here, and the summer sun hits harder. The wind comes down off the Santa Susana Mountains and through the Tierra Rejada Valley, and it does not just blow, it lifts. That is why we see so many wind-lifted ridge caps, curled shingle edges, and loose fasteners on the older tile and shingle roofs in neighborhoods like Mountain Meadows and the streets off Los Angeles Avenue. The dry autumn Santa Ana winds are the real test, and they are also the reason metal roofing makes sense here: a properly fastened standing seam or metal shingle roof does not peel up the way asphalt does. On the hillside lots, drainage matters too. Water runs fast off a steep grade, and a roof that dumps onto a bad gutter or a flat patio slab will find its way into your stucco. We look at the whole roof, the flashing, the gutters, and the grade, not just the panels. Our team has worked on everything from stone-coated steel that matches the Spanish tile look of the subdivisions to corrugated R-panel on sheds and barns out toward Moorpark Road and the ag properties near the college.

We serve Moorpark from our Oxnard base, which means we are close enough to get out for a free estimate without a long wait, and we know the local building department and the HOA patterns in the larger subdivisions. If you are in a tract home with a design review committee, we can help you pick a panel profile and color that will pass.

Our services in Moorpark

How a Job Works in Moorpark

Step 1 is simple: you call us at (805) 330-3288 or ask for a free estimate, and we set a time to come out. We walk the roof, check the attic if there is one, look at the flashing and the fasteners, and talk to you about what we see. No pressure, no sales pitch. You get a written scope and a price before anything starts.

Step 2 is the work itself. In Moorpark, that often means planning around tight side yards in the hillside subdivisions, coordinating with an HOA on panel color, or pulling a permit through the City of Moorpark before we tear anything off. We protect your landscaping, we stage materials where they will not block the driveway, and we keep the job site as tidy as we can while we are working. If we find rot or a bad flashing detail under the old roof, we show you photos and give you a price before we fix it.

Step 3 is cleanup and a final walkthrough. We magnet the yard for nails, haul away the old material, and walk the roof with you so you can see the finished work and ask questions. We leave your property clean, and we do not consider the job done until you are satisfied.

Pricing in Moorpark depends on the size and pitch of your roof, how easy it is to access, the condition of the deck and flashing, and how soon you need it done. As a ballpark, metal roof installation starts around $8 per square foot, standing seam starts around $10, metal roof replacement starts around $9, and a retrofit over existing shingles starts around $7. Repairs and leak repairs start around $450, screw replacement and re-fastening starts around $750, and flashing, chimney, or skylight repair starts around $600. Stone-coated steel and metal shingle both start around $9 per square foot, and coating or painting an existing metal roof starts around $2.50. These are starting figures, not a quote. The only way to know what your roof will cost is to have us look at it. Call (805) 330-3288 for a free estimate and we will give you a real number.

My house is in one of the hillside subdivisions off Tierra Rejada, and the wind really hits the roof. Is standing seam worth it here?
Yes, and for a specific reason. Standing seam panels are fastened with concealed clips, so there are no exposed screws for the wind to work loose. In the Moorpark hills, where the Santa Ana winds come through hard, that matters. We use heavier gauge panels and fasten them to the deck and framing the way the manufacturer requires, and we check the eave and ridge details, which are where wind usually gets a grip. It costs more than corrugated up front, but it holds up better in this wind.
A storm just came through and I have a panel lifted on my roof in Moorpark. What do I do?
Call us right away at (805) 330-3288. If a panel is lifted or peeled, do not get on the roof yourself. We can come out, secure the area, and make a temporary repair so the wind and rain do not make it worse. We also document the damage with photos, which helps if you are filing an insurance claim. We do not promise coverage, that is between you and your insurer, but we will give you the documentation you need.
What does a metal roof cost for a typical Moorpark tract home?
Most of the two-story stucco homes in the Moorpark subdivisions have roofs in the 1,800 to 2,800 square foot range. A retrofit over existing shingles might start around $7 per square foot, a full replacement with a basic panel around $9, and standing seam around $10. So you are generally looking at a range, not a single number, and access, pitch, and how much flashing and trim you need will move it. We give free estimates, so call (805) 330-3288 and we will price your actual roof.
Do I need a permit to replace my roof in Moorpark?
In most cases, yes. The City of Moorpark requires a permit for a full re-roof or replacement, and the rules on how many layers you can recover over are set by code. Fees and inspection requirements vary, so we always confirm with the City of Moorpark Building Department before we start. We handle the permit process for you as part of the job. If your home is in a historic area or an HOA, there may be design review as well, and we can help you navigate that.
My HOA has to approve the roof color. Can you help with that?
Yes. Many of the larger subdivisions in Moorpark have architectural review, and they often want a specific profile or color. We can give you manufacturer color samples and spec sheets to submit to your HOA, and we can suggest panels that match the look of the neighborhood, including stone-coated steel that resembles Spanish tile. If there is a property line issue with a neighbor, for example a roof that drains onto their side, we can talk through the options and make sure the work stays within your property and local rules.
Are you insured for work at my Moorpark property?
Yes, we are fully insured. We carry general liability insurance and workers' compensation coverage for our crew. If you would like a certificate of insurance before we start, just ask and we will send one to you. We think you should ask that of any contractor who works on your home.
What should I do to maintain a metal roof in Moorpark between now and the rainy season?
The main thing in Moorpark is the wind and the sun, not snow. Once a year, take a look at the fasteners and the ridge caps, especially after a windy fall. Check that your gutters are clear of leaves and debris, because a clogged gutter on a steep roof can send water behind the fascia. If you see loose screws, lifted panels, or any sign of a leak, call us at (805) 330-3288. A small repair now is a lot cheaper than a leak that gets into your ceiling. We also offer free inspections if you are not sure what you are looking at.
Why choose us?

Trusted professionals in Oxnard

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Oxnard

All your work handled by qualified professionals in Oxnard

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

254+ Verified Client Reviews in Oxnard

⭐⭐⭐⭐⭐ 4.9/5 · 254 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Oxnard · Response within 24h · No commitment · ☎ (805) 330-3288

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Oxnard ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm