Serving the Oxnard area  ·  (805) 330-3288  ·  Open Mon-Sun 7am-7pm
📞 (805) 330-3288 Free Quote

Metal Roofing in Somis, CA (93066) · Local Professionals

Oxnard Metal Roofing · Fast response in Somis and the Oxnard area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+254Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Somis is farm country, plain and simple. The lots are wide, the wind comes across the fields, and most homes and outbuildings sit on parcels that have been working land for generations. You will see ranch houses, farm sheds, packing buildings, and the occasional newer custom home, all spread out along Los Angeles Avenue and the side roads that run toward the Santa Clara River valley.

When the wind peels back a panel on a packing shed or a fastener backs out on a ranch house roof, folks in 93066 call us because we know how metal behaves in open agricultural country. We are based in Oxnard, just down the road, and we have been on enough Somis roofs to know that the wind here does not mess around.

Metal Roofing in Somis (93066)

Somis sits in a wind corridor. The Santa Ana winds that come through the Santa Clara River valley hit these open fields with nothing to slow them down, and that is the number one thing that separates a Somis roof from a roof in a sheltered subdivision. On agricultural buildings, corrugated and ribbed panels take a beating, and fasteners work loose over time. On homes, wind-lifted edges and separated seams are common after a blow. The soil here is agricultural, which means drainage matters around the perimeter of every building, and when we set up on a job we plan for wide loads and equipment that can handle a dirt driveway or a gravel pad. Access is usually not tight like it is in a city, but it is uneven, and we account for that in how we stage materials and equipment.

Our team has worked on farm sheds, packing houses, carports, and ranch homes throughout Somis and the surrounding Oxnard area. We understand that a metal roof on a working agricultural property has to do its job without a lot of fuss, and we approach every Somis job with that in mind.

Our services in Somis

How a Job Works in Somis

Step 1: You call us at (805) 330-3288, and we set up a free on-site assessment. We walk the roof, check the fasteners, seams, and flashing, and look at how the building sits on the property. For agricultural buildings, we also look at how the roof ties into the rest of the structure and where wind-driven rain might be getting in.

Step 2: We schedule the work and pull the permits that apply. In Somis, most full replacements and re-roofs require a permit through the county, and the rules vary, so we confirm the requirements with the local building department before we start. If your property is in an HOA or has design review, we coordinate that as well. On farm buildings, we plan around your operations so we are not blocking access during harvest or delivery days.

Step 3: We clean up and walk the job with you. That means magnet sweeping for screws, hauling off old material, and making sure you know exactly what was done. We leave your property clean and your roof ready for the next wind.

Pricing in Somis depends on the job. For a typical ranch home, metal roof installation starts around $8 per square foot, and standing seam runs about $10 per square foot. A full replacement starts around $9 per square foot, and a retrofit over existing shingles starts around $7 per square foot. On agricultural buildings, corrugated and ribbed panel roofing starts around $5.50 per square foot, and commercial and agricultural metal roofing is quoted after a free estimate. Repairs start around $450, and screw replacement and re-fastening starts around $750. The key factors are the size and pitch of the roof, how accessible the property is, the condition of the existing roof, and how urgent the work is. Call (805) 330-3288 for a free estimate and a straight answer.

My packing shed on a Somis farm has panels that lift in the wind. Can you fix that without replacing the whole roof?
Yes, in many cases. Wind-lifted panels on agricultural buildings are often a fastener issue or a seam issue. We inspect the panels and the fasteners, replace what is failed, and re-fasten or re-secure the panels that are still sound. If the panels themselves are fatigued or the purlins are compromised, we will tell you that straight and give you options.
A storm just peeled back part of my roof in Somis. How fast can you get out?
We prioritize storm and wind damage calls in Somis and the surrounding area. Call (805) 330-3288, and we will schedule a free inspection as quickly as we can. We can usually get out within a day or two for an active leak or a lifted panel, and we will tarp or secure the roof if needed to prevent further damage.
What does a metal roof cost for a typical Somis ranch house?
For a ranch house in Somis, most installations fall in the range of $8 to $10 per square foot depending on the profile you choose. A retrofit over existing shingles starts around $7 per square foot. The final number depends on the square footage, the roof pitch, how many penetrations there are, and the condition of the existing roof. We give free estimates so you get a real number, not a guess.
Do I need a permit for a metal roof in Somis?
In most cases, yes. Full replacements and re-roofs in the Somis area typically require a permit through the county, and the thresholds and inspection requirements vary. We confirm the requirements with the local building department before we start work, and we handle the permit process as part of the job.
My neighbor's trees drop limbs on my roof, and I am worried about the property line. What can I do?
Property line issues with overhanging trees are common in Somis, where lots are large and trees are mature. We can inspect your roof for damage from fallen limbs and document what we find. We do not get involved in neighbor disputes, but we can give you a clear written report of the roof condition that you can use if you need to talk to your neighbor or your insurance company. If you are in an HOA, we can also coordinate any design review for roof repairs or replacement.
Are you insured for work on my Somis property?
Yes. We are fully insured with general liability and workers' compensation coverage.
What should I do to maintain my metal roof in Somis between storms?
The main thing in Somis is fasteners. Wind works them loose over time, and a loose fastener is where a leak starts. We recommend a quick visual check after any strong wind event, and a professional inspection every couple of years. We also check the flashing around chimneys and skylights, and we clear debris from the gutters, especially after the fall winds. Call us at (805) 330-3288 to schedule an inspection.
Why choose us?

Trusted professionals in Oxnard

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Oxnard

All your work handled by qualified professionals in Oxnard

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

254+ Verified Client Reviews in Oxnard

⭐⭐⭐⭐⭐ 4.9/5 · 254 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Oxnard · Response within 24h · No commitment · ☎ (805) 330-3288

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Oxnard ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm